Application:

1. Mix 5 to 10 pumps with 25g of one of the Fibre Clinix TriBond Treatments.
2. Apply to damp hair.
3. Leave in for up to 10 minutes.
4. Rinse thoroughly.

Hair colorants can cause severe allergic reactions. Do not use to dye eyelashes or eyebrows. Rinse hair well after application. Wear suitable gloves. Avoid contact with skin and eyes. Keep out of reach of children. Staining may occur. CAUTION: This product contains ingredients that may cause skin irritation on certain individuals and a preliminary test according to accompanying directions should first be made. This product must not be used for dyeing the eyelashes or eyebrows. To do so may cause blindness. This product is not intended for use on persons under the age of 16. Read and follow instructions. ATTENTION: FOLLOW ALL SAFETY INSTRUCTIONS. We recommend you perform a skin allergy test 48 hours before each use of this product (See insert) PRELIMINARY PATCH TEST: The skin test should be performed on a small area of skin on the inside of the elbow. A small amount of the product should be applied in a thin layer on the inside of the elbow with a cotton swab and left uncovered for 45 minutes. Avoid contact with clothes. After 45 minutes, wash off the product carefully with lukewarm water. If any reaction occurs during the following 48 hours, rinse immediately and the product should not be used.

• Provides customizable neutralization.
• Enhances color vibrancy and shine.

Aqua (Water, Eau), Polyquaternium-37, Distearoylethyl Hydroxyethylmonium Methosulfate, Cetearyl Alcohol, Parfum(Fragrance), Phenoxyethanol, Acid Violet 43, HC Blue No. 12, Quaternium-91, Methylparaben, Cetrimonium Methosulfate, Lactic Acid, Citric Acid, Calcium, Hydroxide, Hexyl Cinnamal, Limonene, Isopropyl Alcohol, Homolinalyl Acetate, Sodium Sulfate, Sodium Chloride, Benzyl Alcohol