The 48-watt LUMINA is LED/UV Lamp works with most Soak Off Gels, Builder Gels & Traditional Gels
Charging Instructions:
- Connect the charger to the power supply to begin charging lamp.
- The Red Light indicates the lamp is on, the Blue Lights indicate charge level.
- When the lights are blinking, the lamp is charging.
- The lights will appear solid Blue when the lamp is charged.
- You can use the lamp while charging; charging time is 2 hours.
- When hand is placed into the lamp, it will begin working.
- When the hand is removed, the lamp will stop working.
- To set the curing time, press one of the individual buttons: 10s, 30s or 60s. 'S' refers to seconds.
- The countdown time will appear and the lamp will shut off when complete.
- 30X60S Low Power:
- Low Power is used for gels or people who are sensitive to avoid heat spikes during curing.
- The lamp will start out at 30% of power and after 30 seconds automatically increases another 30%, finally reaching the full curing power for a slower cure.
- 90S High Power
- High Power should be used for highly pigmented gels, such as black and white or sculpting with gel when doing thicker applications.
- Sleep Mode
- When the lamp is not in use for 10 minutes it automatically goes to sleep to protect the battery charge. The lamp can be reactivated by pressing the 90S button.
- Cure 60 seconds/coat
- ASP Gel Polish
- ASP Builder Gel with Form-A-Nail
- ASP Builder Gel Clear & Colored Gel
- ASP No Wipe Top Coat
- UV Gels & Hard Gels
- Cure 30 seconds/coat
- ASP Gel Polish Top & Base Coat
- Do NOT cure
- ASP Bonder, air dry only
- Magnetic Tray - Easy to Clean
- 5 finger cure
- Pedicure and Manicure friendly
- Digitial touchscreen display
- Automatically shuts down after 10 minutes of inactivity
- Low and high temperature for hard gels and soft gels to avoid heat spikes